Abstract
OBJECTIVES: The body composition monitor (BCM) is a bioimpedance spectroscopy device, specifically developed for patients on hemodialysis (HD) to improve ultrafiltration (UF) programming, based on an objective assessment of the degree of overhydration (OH) at the start of HD. However, its acceptance in clinical practice remains limited because of concerns about the accuracy at the individual level. The aim of this study is to examine the performance of the BCM and to identify means of improvement. METHODS: Precision of the OH estimate was assessed by 6 consecutive measurements in 24 patients on HD. Accuracy was examined in 45 patients, by comparing the change in OH (ΔOH) during HD with UF volume. Accuracy was considered acceptable if the volume error in individual patients was ≤0.5 L. RESULTS: The OH estimate had an analytical precision of 1.0 ± 0.4%. The correlation between UF volume and ΔOH was moderate (Slope = 0.66, R(2) = 0.44, P < .001) and indicated underestimation of UF volume, in particular for high UF volumes. Accuracy at individual level was highly variable. A volume error >0.5 L occurred in 44% of patients. Accuracy improved over the course of HD, with a decrease in total error range from 2.3 L in the first hour to 1.1 L in the final hour of HD. CONCLUSIONS: The accuracy of BCM volume change estimates is highly variable and below requirements of daily practice. Improvement may be achieved by a switch to an end-of-HD measurement.
