Abstract
Polyurethane (PU) has been widely used for the biomedical applications but its potential for bone regeneration is limited due to its lack of osteoconductive properties. Strontium substituted hydroxyapatite (SrHA) particles, on the other hand, are known to exhibit a positive effect on bone formation. Therefore, the aim of this study was to (i) develop porous polyurethane scaffolds containing strontium SrHA nanoparticles (PU/SrHA) and (ii) compare their in vitro biological performance for applications in bone regeneration to PU scaffolds. SrHA and HA was synthesized using a conventional wet-chemical neutralization reaction at temperatures of 25, 50, and 80 degrees C. Chemical analysis was performed by inductively coupled plasma-optical emission spectrometry. Synthesizing temperatures at 25 and at 50 degrees C were selected for the composite preparation (abbreviated as HA-25, SrHA-25, HA-50, and SrHA-50, respectively). PU was synthesized from isophorone diisocyanate, polytetramethylene ether glycol, and 1,4-butanediol. Composite scaffolds were prepared by addition of HA or SrHA nanoparticles into PU scaffolds during polymer preparation. The results showed that the Sr content in HA nanoparticles increased with increasing synthesis temperature. The addition of nanoparticles decreased the elongation-at-break and tensile strength, but significantly increased the surface wettability of the PU scaffolds. In vitro degradation tests demonstrated that release of cations was significantly higher from PU/SrHA-50 composite scaffolds. Cell culture tests indicated that PU composites containing either HA or SrHA nanoparticles increased proliferation of bone marrow stem cells as compared to plain PU scaffolds, whereas osteogenic differentiation was not affected by the incorporation of HA nanoparticles irrespective of the incorporation of Sr.
