Browsing by Author "Janssen, D.W."

A novel approach for optimal graft positioning and tensioning in anterior cruciate ligament reconstructive surgery based on the finite element modeling technique

Naghibi, Hamid; Janssen, D.W. ; Tienen, T. van ; Groes, S.A. van de ; Boogaard, T. van de; Verdonschot, N.J.

2020, Article / Letter to editor (Knee, vol. 27, iss. 2, (2020), pp. 384-396)

The implications of non-anatomical positioning of a meniscus prosthesis on predicted human knee joint biomechanics

Naghibi, H.; Janssen, D.W. ; Boogaard, T. van de; Tienen, T. van ; Verdonschot, N.J.

2020, Article / Letter to editor (Medical & Biological Engineering & Computing, vol. 58, iss. 6, (2020), pp. 1341-1355)

The Effects of Cyclic Loading and Motion on the Implant-Cement Interface and Cement Mantle of PEEK and Cobalt-Chromium Femoral Total Knee Arthroplasty Implants: A Preliminary Study

Ruiter, L. de ; Cowie, Raelene M.; Jennings, Louise M.; Briscoe, A.; Janssen, D.W. ; Verdonschot, N.J.J.

2020, Article / Letter to editor (Materials (Basel), vol. 13, iss. 15, (2020), article 3323)

Quantification of human bone microarchitecture damage in press-fit femoral knee implantation using HR-pQCT and digital volume correlation

Rapagna, Sophie; Berahmani, S.; Wyers, Caroline E.; Bergh, Joop P. W. van den; Reynolds, Karen J.; Tozzi, Gianluca; Janssen, D.W. ; Perilli, Egon

2019, Article / Letter to editor (Journal of the Mechanical Behavior of Biomedical Materials, vol. 97, (2019), pp. 278-287)

A noninvasive MRI based approach to estimate the mechanical properties of human knee ligaments

Naghibi, H.; Mazzoli, V.; Gijsbertse, K.; Hannink, G.J. ; Sprengers, A.M.; Janssen, D.W. ; Boogaard, Ton Van den; Verdonschot, N.J.

2019, Article / Letter to editor (Journal of the Mechanical Behavior of Biomedical Materials, vol. 93, (2019), pp. 43-51)

Feasibility study of intraoperative cone-beam CT navigation for benign bone tumour surgery

Steenbergen, T.R.F. van; Geest, I.C.M. van der ; Janssen, D.W. ; Rovers, M.M. ; Futterer, J.J.

2019, Article / Letter to editor (International Journal of Medical Robotics and Computer Assisted Surgery, vol. 15, iss. 3, (2019), article e1993)

The effects of manufacturing tolerances and assembly force on the volumetric wear at the taper junction in modular total hip arthroplasty

Bitter, T. ; Khan, I.; Marriott, T.; Lovelady, E.; Verdonschot, N.J. ; Janssen, D.W.

2019, Article / Letter to editor (Computer Methods in Biomechanics and Biomedical Engineering, vol. 22, iss. 13, (2019), pp. 1061-1072)

Biomechanical comparison of two different locking plates for open wedge high tibial osteotomy

Egmond, N. van; Janssen, D.W. ; Hannink, G.J. ; Verdonschot, N.J.J. ; Kampen, A. van

2018, Article / Letter to editor (Journal of Orthopaedic Science, vol. 23, iss. 1, (2018), pp. 105-111)

Evaluation of interference fit and bone damage of an uncemented femoral knee implant

Berahmani, S.; Hendriks, M.; Jong, Joost J.A. de; Bergh, J.P.W. van den; Maal, T.J.J. ; Janssen, D.W. ; Verdonschot, N.J.J.

2018, Article / Letter to editor (Clinical Biomechanics, vol. 51, (2018), pp. 1-9)

Do Stem Design and Surgical Approach Influence Early Aseptic Loosening in Cementless THA?

Janssen, L; Wijnands, K.A.P.; Janssen, D.W. ; Janssen, M; Morrenhof, J.W.

2018, Article / Letter to editor (Clinical Orthopaedics and Related Research, vol. 476, iss. 6, (2018), pp. 1212-1220)

Inducing targeted failure in cadaveric testing of 3-segment spinal units with and without simulated metastases

Groenen, K.H.J.; Janssen, D.W. ; Linden, Y.M. van der; Kooloos, J.G.M. ; Homminga, J.; Verdonschot, N.J. ; Tanck, E.J.

2018, Article / Letter to editor (Medical Engineering & Physics, vol. 51, (2018), pp. 104-110)

The peripheral soft tissues should not be ignored in the finite element models of the human knee joint

Beidokhti, H.N.; Janssen, D.W. ; Groes, S.A. van de ; Verdonschot, N.J.

2018, Article / Letter to editor (Medical & Biological Engineering & Computing, vol. 56, iss. 7, (2018), pp. 1189-1199)

Finite element wear prediction using adaptive meshing at the modular taper interface of hip implants

Bitter, T. ; Khan, I.; Marriott, T.; Lovelady, E.; Verdonschot, N.J.J. ; Janssen, D.W.

2018, Article / Letter to editor (Journal of the Mechanical Behavior of Biomedical Materials, vol. 77, (2018), pp. 616-623)

Anterior referencing of tibial slope in total knee arthroplasty considerably influences knee kinematics: a musculoskeletal simulation study

Marra, M.A.; Strzelczak, Marta; Heesterbeek, Petra J. C.; Groes, S.A.W. van de ; Janssen, D.W. ; Koopman, B.; Wymenga, A.B. ; Verdonschot, N.J.J.

2018, Article / Letter to editor (Knee Surgery, Sports Traumatology, Arthroscopy, vol. 26, iss. 5, (2018), pp. 1540-1548)

Flexing and downsizing the femoral component is not detrimental to patellofemoral biomechanics in posterior-referencing cruciate-retaining total knee arthroplasty

Marra, M.A.; Strzelczak, Marta; Heesterbeek, Petra J. C.; Groes, S.A.W. van de ; Janssen, D.W. ; Koopman, B.; Verdonschot, N.J.J. ; Wymenga, A.B.

2018, Article / Letter to editor (Knee Surgery, Sports Traumatology, Arthroscopy, vol. 26, iss. 11, (2018), pp. 3377-3385)

Case-specific non-linear finite element models to predict failure behavior in two functional spinal units

Groenen, K.H.J.; Bitter, T. ; Veluwen, Tristia C.G. van; Linden, Y.M. van der; Verdonschot, N.J.J. ; Tanck, E.J. ; Janssen, D.W.

2018, Article / Letter to editor (Journal of Orthopaedic Research, vol. 36, iss. 12, (2018), pp. 3208-3218)

Experimental pre-clinical assessment of the primary stability of two cementless femoral knee components

Berahmani, S.; Wolfson, D.; Wright, A.; Janssen, D.W. ; Verdonschot, N.J.

2017, Article / Letter to editor (Journal of the Mechanical Behavior of Biomedical Materials, vol. 75, (2017), pp. 322-329)

Evaluation of a Surrogate Contact Model in Force-Dependent Kinematic Simulations of Total Knee Replacement

Marra, M.A.; Andersen, M.S.; Damsgaard, M.; Koopman, B.; Janssen, D.W. ; Verdonschot, N.J.

2017, Article / Letter to editor (Journal of Biomechanical Engineering-Transactions of the Asme, vol. 139, iss. 8, (2017), article 081001)

Experimental and computational analysis of micromotions of an uncemented femoral knee implant using elastic and plastic bone material models

Berahmani, S.; Janssen, D.W. ; Verdonschot, N.J.

2017, Article / Letter to editor (Journal of Biomechanics, vol. 61, (2017), pp. 137-143)

Improving stress shielding following total hip arthroplasty by using a femoral stem made of beta type Ti-33.6Nb-4Sn with a Young's modulus gradation

Yamako, G.; Janssen, D.W. ; Hanada, S.; Anijs, T.J. ; Ochiai, K.; Totoribe, K.; Chosa, E.; Verdonschot, N.J.

2017, Article / Letter to editor (Journal of Biomechanics, vol. 63, (2017), pp. 135-143)

Development of a fast curing tissue adhesive for meniscus tear repair

Bochynska, A.; Hannink, G.J. ; Janssen, D.W. ; Buma, P ; Grijpma, D.W.

2017, Article / Letter to editor (Journal of Materials Science-Materials in Medicine, vol. 28, iss. 1, (2017), pp. 1)

Tibial component with and without stem extension in a trabecular metal cone construct

Meijer, M.F.; Boerboom, A.L.; Stevens, M; Reininga, I.H.F.; Janssen, D.W. ; Verdonschot, N.J. ; Bulstra, S.K.

2017, Article / Letter to editor (Knee Surgery, Sports Traumatology, Arthroscopy, vol. 25, iss. 11, (2017), pp. 3644-3652)

Relaxation of the MCL after an Open-Wedge High Tibial Osteotomy results in decreasing contact pressures of the knee over time

Egmond, N. van; Hannink, G.J. ; Janssen, D.W. ; Vrancken, A.C.; Verdonschot, N.J. ; Kampen, A. van

2017, Article / Letter to editor (Knee Surgery, Sports Traumatology, Arthroscopy, vol. 25, iss. 3, (2017), pp. 800-807)

A modelling approach demonstrating micromechanical changes in the tibial cemented interface due to in vivo service.

Srinivasan, P. ; Miller, M.A.; Verdonschot, N.J. ; Mann, K.A.; Janssen, D.W.

2017, Article / Letter to editor (Journal of Biomechanics, vol. 56, (2017), pp. 19-25)

A preclinical numerical assessment of a polyetheretherketone femoral component in total knee arthroplasty during gait

Ruiter, L. de ; Janssen, D.W. ; Briscoe, A.; Verdonschot, N.J.

2017, Article / Letter to editor (Journal of Experimental Orthopaedics, vol. 4, iss. 1, (2017), pp. 3)

Strain shielding in trabecular bone at the tibial cement-bone interface

Srinivasan, P. ; Miller, M.A.; Verdonschot, N.J. ; Mann, K.A.; Janssen, D.W.

2017, Article / Letter to editor (Journal of the Mechanical Behavior of Biomedical Materials, vol. 66, (2017), pp. 181-186)

The mechanical response of a polyetheretherketone femoral knee implant under a deep squatting loading condition

Ruiter, L. de ; Janssen, D.W. ; Briscoe, A.; Verdonschot, N.J.

2017, Article / Letter to editor (Proceedings of the Institution of Mechanical Engineers Part H - Journal of Engineering in Medicine, vol. 231, iss. 12, (2017), pp. 1204-1212)

The influence of ligament modelling strategies on the predictive capability of finite element models of the human knee joint

Naghibi, H.; Janssen, D.W. ; Groes, S.A. van de ; Hazrati, J.; Boogaard, T. van de; Verdonschot, N.J.

2017, Article / Letter to editor (Journal of Biomechanics, vol. 65, (2017), pp. 1-11)

A combined experimental and finite element approach to analyse the fretting mechanism of the head-stem taper junction in total hip replacement

Bitter, T. ; Khan, I.; Marriott, T.; Lovelady, E.; Verdonschot, N.J. ; Janssen, D.W.

2017, Article / Letter to editor (Proceedings of the Institution of Mechanical Engineers Part H - Journal of Engineering in Medicine, vol. 231, iss. 9, (2017), pp. 862-870)

Fixation strength of a polyetheretherketone femoral component in total knee arthroplasty

Ruiter, L. de ; Janssen, D.W. ; Briscoe, A.; Verdonschot, N.J.J.

2017, Article / Letter to editor (Medical Engineering & Physics, vol. 49, (2017), pp. 157-162)

Changes in microgaps, micromotion, and trabecular strain from interlocked cement-trabecular bone interfaces in total knee replacements with in vivo service

Miller, M.A.; Goodheart, J.R.; Khechen, B.; Janssen, D.W. ; Mann, K.A.

2016, Article / Letter to editor (Journal of Orthopaedic Research, vol. 34, iss. 6, (2016), pp. 1019-1025)

A comparison between dynamic implicit and explicit finite element simulations of the native knee joint

Beidokhti, H.N.; Janssen, D.W. ; Khoshgoftar, M.; Sprengers, A.M.; Perdahcioglu, E.S.; Boogaard, T. van de; Verdonschot, N.J.

2016, Article / Letter to editor (Medical Engineering & Physics, vol. 38, iss. 10, (2016), pp. 1123-1130)

FE analysis of the effects of simplifications in experimental testing on micromotions of uncemented femoral knee implants

Berahmani, S.; Janssen, D.W. ; Wolfson, D.; Waal Malefijt, M.C. de ; Fitzpatrick, C.K.; Rullkoetter, P.J.; Verdonschot, N.J.

2016, Article / Letter to editor (Journal of Orthopaedic Research, vol. 34, iss. 5, (2016), pp. 812-819)

In-situ mechanical behavior and slackness of the anterior cruciate ligament at multiple knee flexion angles

Rachmat, H.H.; Janssen, D.W. ; Verkerke, G.J.; Diercks, R.L.; Verdonschot, N.J.J.

2016, Article / Letter to editor (Medical Engineering & Physics, vol. 38, iss. 3, (2016), pp. 209-215)

Functional biomechanical performance of a novel anatomically shaped polycarbonate urethane total meniscus replacement

Vrancken, A.C.T.; Eggermont, F.E. ; Tienen, T.G. van ; Hannink, G.J. ; Buma, P. ; Janssen, D.W. ; Verdonschot, N.J.

2016, Article / Letter to editor (Knee Surgery, Sports Traumatology, Arthroscopy, vol. 24, iss. 5, (2016), pp. 1485-1494)

Experimental Measurement of the Static Coefficient of Friction at the Ti-Ti Taper Connection in Total Hip Arthroplasty

Bitter, T. ; Khan, I.; Marriott, T.; Schreurs, B.W. ; Verdonschot, N.J. ; Janssen, D.W.

2016, Article / Letter to editor (Journal of Biomechanical Engineering-Transactions of the Asme, vol. 138, iss. 3, (2016), article 4032446)

Experimental and computational micromechanics at the tibial cement-trabeculae interface

Srinivasan, P. ; Miller, M.A.; Verdonschot, N.J. ; Mann, K.A.; Janssen, D.W.

2016, Article / Letter to editor (Journal of Biomechanics, vol. 49, iss. 9, (2016), pp. 1641-1648)

Material properties of the human posterior knee capsule

Rachmat, H.H.; Janssen, D.W. ; Verkerke, G.J.; Diercks, R.L.; Verdonschot, N.J.

2015, Article / Letter to editor (Bio-Medical Materials and Engineering, vol. 25, iss. 2, (2015), pp. 177-187)

The effect of surface morphology on the primary fixation strength of uncemented femoral knee prosthesis: a cadaveric study

Berahmani, S.; Janssen, D.W. ; Wolfson, D.; Rivard, K.; Waal Malefijt, M.C. de ; Verdonschot, N.J.

2015, Article / Letter to editor (Journal of Arthroplasty, vol. 30, iss. 2, (2015), pp. 300-307)

An experimental study to investigate biomechanical aspects of the initial stability of press-fit implants

Berahmani, S.; Janssen, D.W. ; Kessel, S. van; Wolfson, D.; Waal Malefijt, M.C. de ; Buma, P. ; Verdonschot, N.J.

2015, Article / Letter to editor (Journal of the Mechanical Behavior of Biomedical Materials, vol. 42, (2015), pp. 177-185)

TLEM 2.0 - A comprehensive musculoskeletal geometry dataset for subject-specific modeling of lower extremity

Carbone, V.; Fluit, R.; Pellikaan, P.; Krogt, M.M. van der; Janssen, D.W. ; Damsgaard, M.; Vigneron, L.; Feilkas, T.; Koopman, H.F.; Verdonschot, N.J.

2015, Article / Letter to editor (Journal of Biomechanics, vol. 48, iss. 5, (2015), pp. 734-741)

The sensitivity of cartilage contact pressures in the knee joint to the size and shape of an anatomically shaped meniscal implant

Khoshgoftar, M.; Vrancken, A.C.T.; Tienen, T.G. van ; Buma, P. ; Janssen, D.W. ; Verdonschot, N.J.

2015, Article / Letter to editor (Journal of Biomechanics, vol. 48, iss. 8, (2015), pp. 1427-1435)

Incorporating in vivo fall assessments in the simulation of femoral fractures with finite element models

Zijden, A.M. van der ; Janssen, D.W. ; Verdonschot, N.J.J. ; Groen, B.E.; Nienhuis, B. ; Weerdesteijn, V.G.M. ; Tanck, E.J.M.

2015, Article / Letter to editor (Medical Engineering & Physics, vol. 37, iss. 6, (2015), pp. 593-598)

Improving peri-prosthetic bone adaptation around cementless hip stems: A clinical and finite element study

Broeke, R.H. Ten; Tarala, M. ; Arts, J.J.C.; Janssen, D.W. ; Verdonschot, N.J.J. ; Geesink, R.G.T.

2014, Article / Letter to editor (Medical Engineering & Physics, vol. 36, iss. 3, (2014), pp. 345-353)

Releasing the circumferential fixation of the medial meniscus does not affect its kinematics

Vrancken, A.C.; Tienen, T.G. van ; Hannink, G.J. ; Janssen, D.W. ; Verdonschot, N.J. ; Buma, P.

2014, Article / Letter to editor (Knee, vol. 21, iss. 6, (2014), pp. 1033-1038)

3D geometry analysis of the medial meniscus - a statistical shape modeling approach

Vrancken, A.C.T.; Crijns, S.P.; Ploegmakers, M.J.M. ; O'Kane, C.; Tienen, T.G. van ; Janssen, D.W. ; Buma, P. ; Verdonschot, N.J.J.

2014, Article / Letter to editor (Journal of Anatomy, vol. 225, iss. 4, (2014), pp. 395-402)

Toward a method to simulate the process of bone ingrowth in cementless THA using finite element method.

Tarala, M. ; Janssen, D.W. ; Verdonschot, N.J.J.

2013, Article / Letter to editor (Medical Engineering & Physics, vol. 35, iss. 4, (2013), pp. 543-548)

On stabilization of loosened hip stems via cement injection into osteolytic cavities

Andreykiv, A.; Janssen, D.W. ; Nelissen, R.G.; Valstar, E.R.

2012, Article / Letter to editor (Clinical Biomechanics, vol. 27, iss. 8, (2012), pp. 807-812)

The assessment of the risk of fracture in femora with metastatic lesions: Comparing case-specific finite element analyses with predictions by clinical experts.

Derikx, L.C.E.M. ; Aken, J.B. van ; Janssen, D.W. ; Snyers-Steyvers, A.; Linden, Y.M. van der; Verdonschot, N.J. ; Tanck, E.J.

2012, Article / Letter to editor (Journal of Bone and Joint Surgery. British Volume, vol. 94, iss. 8, (2012), pp. 1135-1142)

Toward a more realistic prediction of peri-prosthetic micromotions.

Ploeg, B. van der; Tarala, M. ; Homminga, J.; Janssen, D.W. ; Buma, P. ; Verdonschot, N.J.

2012, Article / Letter to editor (Journal of Orthopaedic Research, vol. 30, iss. 7, (2012), pp. 1147-1154)

Radboud Repository

Browsing by Author "Janssen, D.W."

Search Repository

Browse

All of Repository